Tirzepatide Units

How Many Units Is 10 mg of Tirzepatide?

It depends on the vial strength. 10 mg of tirzepatide is 50 units (0.5 mL) from a brand single-dose vial labeled 10 mg/0.5 mL, 60 units (0.6 mL) from a brand multi-dose vial labeled 40 mg/2.4 mL, and 100 units (1 mL) from a compounded vial at 10 mg/mL. For any other compounded concentration, enter it below.

Follow your prescription and pharmacy label. Ask the prescriber or pharmacist if anything is unclear.

1. Which vial?
Vial type

Concentration: 10 mg ÷ 0.5 mL = 20 mg/mL. The label dose is 0.5 mL, the whole vial.

2. Convert
3. Syringe (U-100)
Calculated dose

10 mg = 50 units(0.5 mL at 20 mg/mL)

  1. Step 1. Concentrationmg/mL = mg in vial ÷ mL in vial
    10 mg ÷ 0.5 mL = 20 mg/mL
  2. Step 2. VolumemL = mg ÷ (mg/mL)
    10 ÷ (10 ÷ 0.5) = 0.5 mL
  3. Step 3. Units on a U-100 syringeunits = mL × 100
    0.5 × 100 = 50 units
Needle (0)Plunger0102030405060708090100Draw to 50 unitsAlign leading edge of black stopper

10 mg in units by vial strength

Tirzepatide brand vials (Zepbound and Mounjaro labels, section 3)
DoseSingle-dose vialDrawMulti-dose vialDraw
10 mg10 mg/0.5 mL0.5 mL = 50 units40 mg/2.4 mL (16.67 mg/mL)0.6 mL = 60 units
Compounded vials: mL and units at example concentrations
Dose5 mg/mL10 mg/mL15 mg/mL20 mg/mL25 mg/mL
10 mg2 mL = 200 u *1 mL = 100 u0.667 mL = 66.7 u0.5 mL = 50 u0.4 mL = 40 u

* More than 100 units: does not fit in a 1 mL syringe in one draw.

The steps for 10 mg

Single-dose vial, 10 mg/0.5 mL

  1. Concentration: 10 mg ÷ 0.5 mL = 20 mg/mL
  2. Volume: 10 ÷ (10 ÷ 0.5) = 0.5 mL
  3. Units on a U-100 syringe: 0.5 × 100 = 50 units

Result: 10 mg = 0.5 mL = 50 units

Multi-dose vial, 40 mg/2.4 mL

  1. Concentration: 40 mg ÷ 2.4 mL = 16.667 mg/mL
  2. Volume: 10 ÷ (40 ÷ 2.4) = 0.6 mL
  3. Units on a U-100 syringe: 0.6 × 100 = 60 units

Result: 10 mg = 0.6 mL = 60 units

Compounded vial, 10 mg/mL

  1. Concentration: 10 mg/mL (from the pharmacy label)
  2. Volume: 10 ÷ 10 = 1 mL
  3. Units on a U-100 syringe: 1 × 100 = 100 units

Result: 10 mg = 1 mL = 100 units

Where 10 mg sits in the dose escalation

In the label, 10 mg comes after at least 4 weeks on 7.5 mg; the earliest it can start is week 13. Zepbound lists 10 mg as a maintenance dose for both weight reduction and obstructive sleep apnea. The next step up is 12.5 mg, after at least 4 more weeks. The prescriber decides which dose to use and when.

The Zepbound and Mounjaro labels start at 2.5 mg once weekly for 4 weeks. 2.5 mg is only for starting treatment, not a maintenance dose. After that the dose goes up in 2.5 mg steps, with at least 4 weeks on each dose. Zepbound lists 5 mg, 10 mg or 15 mg as maintenance doses for weight reduction and 10 mg or 15 mg for obstructive sleep apnea. The maximum is 15 mg once weekly. The weeks in the table are the earliest a dose can start under the label; the prescriber decides the actual schedule.

Full schedule with mL and units: tirzepatide dosage chart.

Units vs mg

A mg (milligram) is the amount of tirzepatide. A unit is a mark on a U-100 insulin syringe, and on a U-100 syringe 100 units fill 1 mL, so 1 unit is 0.01 mL. Units measure volume, not drug. How much tirzepatide is in those units depends on how concentrated the liquid is.

Why the vial concentration matters

The same dose can be very different volumes. 2.5 mg is 25 units only at 10 mg/mL. At 5 mg/mL it is 50 units, and at 25 mg/mL it is 10 units. That is why this calculator asks for the vial first and never assumes a concentration.

Brand vs compounded vials

Brand tirzepatide vials (Zepbound and Mounjaro) are made so every dose is the same volume: 0.5 mL (50 units) from a single-dose vial, or 0.6 mL (60 units) from a multi-dose vial that holds 4 doses. The vial strength changes with the dose instead. Compounded vials are prepared by a pharmacy at a concentration of its choosing, so the volume for a given dose changes from vial to vial. Read the mg/mL on the pharmacy label.

Other tirzepatide doses in units

Or use the tirzepatide units to mg calculator for any dose and concentration.

Frequently asked questions

How many units is 10 mg of tirzepatide?
It depends on the vial. In a brand single-dose vial (10 mg/0.5 mL) 10 mg is 0.5 mL, or 50 units. In a brand multi-dose vial (40 mg/2.4 mL) it is 0.6 mL, or 60 units. In a compounded vial at 10 mg/mL it is 1 mL, or 100 units.
How many mL is 10 mg of tirzepatide?
0.5 mL from a brand single-dose vial and 0.6 mL from a brand multi-dose vial. For a compounded vial, divide 10 by the mg/mL on the label: at 10 mg/mL that is 1 mL.
Is 10 mg always 100 units?
No. 10 mg is 100 units only when the concentration is exactly 10 mg/mL. Brand vials are 20 mg/mL (single-dose) and 16.67 mg/mL (multi-dose), so the same 10 mg is 50 or 60 units there.
What concentration is a 10 mg tirzepatide vial?
The single-dose vial is 10 mg/0.5 mL, which is 10 ÷ 0.5 = 20 mg/mL. The multi-dose vial is 40 mg/2.4 mL, which is 40 ÷ 2.4 = 16.67 mg/mL.

Sources

Doses and vial strengths checked against these labels on 2026-10-22.